You can’t beat the welcome that wooden flooring offer following a long, hard day at work. Be that as it may, those shiny boards just keep going so long. Before you know it, the scratches and water harm have taken their toll and your floors require an excessive resurfacing.

Progresses in the tile business have created a wood-look tile to rival all that you adore about wooden flooring without the issues of hardwood. Wood-look lines offer all of you the excellence of residential and outlandish hardwoods with the best qualities you’ve come to love in our tile.

Wood-Look Tile

Here’s the reason individuals support wooden flooring over conventional hardwood.

Durability

Wooden flooring is famously hard to keep up. It scratches, gouges, twists, splits, and chips under anxiety from movement, pets, and wreckage heaps. It should be cleaned consistently and resurfaced/resealed each couple of years.

Wood-look flooring is anything but difficult to keep up and simple to clean. You don’t need to be cautious about your cleaning routines or stress over harming tile when your puppy hurries to the entryway or your youngster drops the whole pitcher of red punch.

In the event that harm occurs, you can supplant a various tiles effortlessly without ripping up an entire segment of the floor. You ought to consider putting down new sealer each 3-5 years to keep dampness from saturating the tile or the grout.

Diminished Costs

Wood floors can run anywhere or additionally relying upon the kind of wood you select. Add to that the expense of establishment and support and you may begin to think about whether it’s justified, despite all the trouble.

The Tile cost about the same as wood however is not as work escalated as wood boards. The expense of support on tile incorporates a basic resealing instead of the resurfacing, and resealing that wood requires.

Innovation in the tile business has created tile that looks so much like wood you’d need to get down staring you in the face and knees to see the distinction. Little points of interest like grain, bunches, and contrasts in shade are effectively reproduced on tile. That implies that you can get the look of an expensive, extraordinary wood at an a great deal more sensible tile cost.

Unlimited Application

Wood can fade when presented to an excessive amount of daylight and twist when presented to an excess of dampness. In the event that you were seeking after hardwood in the kitchen or washroom, you may be in a tight spot.

Wood-look tile can go pretty much anyplace, incorporating into the shower and outside where wood simply doesn’t cut it. It really repulses fluid, taking out issues with re-coloring, shape, and distorting.

Customization

Planning a unique example on a wood floor can be costly and tedious. With tile, customization is implicit. You can blend and-match hues, grains, and sizes for your own particular one of a kind outline.

Maintainability

About 20 million trees are chopped as the year progressed. Wood-look flooring can chop down that amazing number. Tile gives the glow and inviting look of wood without crushing a single tree.

The tile materials can last numerous decades. You’ll need to redesign your look much sooner than your tile wears out.

Nothing matches the claim, warmth, and execution of Wooden Flooring tile. Make a delightful floor today with our wood-emulating choices and locate the strong option you’ve been searching for.

http://www.sooperarticles.com/business-articles/wood-look-tile-favored-over-wooden-flooring-1455348.html

Tile gives bathrooms an upscale appearance, and it’s more durable than many other materials. But installing tile also costs more than bathtub surrounds or vinyl flooring.

Whether you’ve decided on your products or are still gathering bathroom floor and shower tile ideas, you have to know how much you;re going to spend. Read more here.

Bathroom Tile Installation

Other Costs and Considerations

Homeowners thinking about having any kind of new bathroom tiling installed should not only factor in the cost per square foot of tile needed but installation and labor costs as well. Most of the time, contractors are happy to provide homeowners with a free cost estimate prior to beginning any work. Usually, this cost estimate includes labor. However, if it does not, homeowners should be prepared to shell out an additional $450 to $600 in installation costs alone. It is actually not uncommon for the labor and installation costs to be more than the material costs of the project.

Homeowners should also do their best to get an idea of material costs by first figuring out how much tile they will need to get the project done. This can be calculated by simply multiplying the length of the bathroom times the width to get a complete surface area of the space. Then, subtract the square footage of any spaces that will not need to be tiled such as areas taken up by the bathtub, shower, toilet and sink. The remaining square footage is what will need to be tiled; homeowners should then purchase a little bit more tile than is technically needed to pad for errors.

Many homeowners look for ways to save on their new flooring installation costs as well. Fortunately, there are many ways to go about doing this. Homeowners can shop around with different companies and contractors to find special deals and promotions. In some cases, it may even be possible for a homeowner to install the tile him or herself, though this may require at least some previous knowledge or experience.

Having new bathroom tile installed in one’s home can be a great way to update a bathroom without necessarily having to spend a great deal of money in the process. The key is simply to choose the flooring type that is best for the space and that coincides with the homeowner’s budget. From there, homeowners can enjoy an improved space and increased resale value in the home as well. Read more here.

Many a would-be real estate flipper has underestimated renovation costs. All too often, I receive an e-mail from someone saying they have a great deal for me on a home that only needs about $10,000 in fix up.

I normally send those right to junk mail because in most cases $10,000 doesn’t even buy new carpet and paint. Rosy renovation estimates are probably the No. 1 killer of real estate flippers. Before you dive into the first flip project or even that home remodeling project, do some homework and get real about the material and labor costs.

“I don’t need to know the labor costs,” says the do-it-yourselfer. You’d still better have a realistic estimate on time. The labor costs may not hit your wallet but they will certainly hit your lower back, knees and possibly personal life.

First sit down and list out all the materials you’ll need. Then walk through each task of the renovation project and estimate your labor hours. Take those time estimates and see how they fit into your schedule if you’re doing the job yourself. And be realistic, most of us are not accustomed to hard labor.

If your body is not used to setting tile, you might be feeling the burn come day two. Having your kitchen torn apart for three plus weeks might come with a greater personal price than you’re willing to bear. And, as for flippers, time is money. The longer it takes to renovate a home, the greater the opportunity costs. Most of us have a limited number of homes we can hold, so every day you spend renovating is a day you cannot be accumulating. Missing out on one great deal can be far more costly than contracting out your renovations.

VIDEO: Home Renovation Tips for Investors

As an example, let’s say you’re going to renovate a 5-foot-by-7-foot bathroom. It will be a basic bathroom with ceramic tile floor and tub surround. Including the floor, the tub surround and an extra 10 percent for waste, there will be about 100 square feet of tile.

Most contractors are probably going to estimate around 50 hours for a project like this and they’ll probably charge $35 to $50 per labor hour. So on the low end, a contractor estimate will probably come in at around $1,750 for just labor. This is right about in line with the costs I get from my contractors. There is a huge variation in contractor pricing, so get multiple bids.

Put these two numbers together and you’re looking at about $3,200 for a basic bathroom renovation, including 6 percent tax on materials and a 10 percent fudge factor. This does not include dumping fees and haul away. Normally my contractors bid anywhere from $3,500 to $5,000 for a basic bathroom renovation.

Just to give you a realistic idea on a couple more common costs, I pulled up the numbers from one of my past projects. This home was 1,200 square feet on two levels plus about an 800 square feet basement. The total renovation cost was approximately $85,000.

I’ve never had a home renovation that costs much less than about $35,000. Construction costs vary widely. Some people say I pay too much for work but I can’t get quality work done for any cheaper. And most people who just call contractors out of the yellow pages will find they’re quoted prices much higher than what I’ve listed here.

The only point I want to make is that you need to do your homework and get realistic about costs. My prices here are only examples. You need to know what your costs will be before you commit to a large project.

Article Source: http://www.washingtonpost.com/blogs/where-we-live/post/estimating-the-cost-of-your-home-renovation-project/2012/10/02/52314cfa-0ca4-11e2-a310-2363842b7057_blog.html